HelloSign

This project introduces the user to some of the features in part wizard, which will help create the code that the shopbot can run.

Parts of this can be standardized so that many people can work quickly. If the sample size is standardized, it will allow consistent placement on the toolbed. Using the same size router bit will help with consistency as well. It is also possible to use a different bit to reach more creative and individualized results.

This writeup is intended to be a starting point, and after going through this process, you may customize it to your needs. Pass the word on about techniques that work better.

Secure your sample to the toolbed. You may screw it to the wooden bed, or you can clamp it securely. Make sure there is not debris on the bed, your sample should sit flat and secure.

Measure your workpiece. For this example, we will design for 4" x 9" x 3/4" thick

Open Part Wizard

Choose Create New Model on the left.

Plug in your dimensions of the sample piece

Choose machine z zero as top of block

Choose inches as units.

Press OK

A white box should appear that shows the proportions of your work area.

There are measurements along the top and left sides.

both the Y axis on the left and X axis on the top should have a zero point of the bottom left corner.

Go to the Vector Editing sectio on the left

Choose the create vector text button.

The Text Tool window will show up on the left.

The fonts that work with the v bit will show up in red.

Choose a size, like 2.75 inches

You can choose bold or italics with the button on the top.

Click on the white box on the right and type some text.

You can move the text around by putting the mouse near the dotted line and clicking when it turns to a cross.

Press Done and you will return to the Assistant window on the left.